P40T触摸屏定位控制器可编程多轴定位控制器
TFT显示器带触摸操作手动功能
单机操作
程序存储器
数字输出可达2A
模拟输出
材料取决于间隙、角度和压力计算
可用于剪板机
板材托架
板材退回
MECHANICAL DATA
Housing | panel housing |
Housing material | front plate: aluminium, housing: galvanized steel sheet |
Front plate dimensions (W x H) | 180 x 144 mm |
Housing dimensions (W x H) |
136 x 136 mm |
Panel cut out (W x H) | 138 x 138 mm |
Keyboard | touchscreen |
Installation depth | 48 mm (without connectors), 83 mm (with connectors) |
ELCTRICAL DATA
Display | TFT touch screen monitor |
Hardware | 32 bit microcontroller with 1 MByte flash and 128 KByte RAM |
Program memory | up to 1.000 steps, more on request |
System accuracy | ± 1 increment |
Power supply voltage | 24 VDC +10/-20 % |
Current consumption | max. 200 mA (unloaded), permitted total current (incl. self-consumption): 1A |
Encoder supply voltage | 24 VDC or 5 VDC |
Load by encoder / measuring system | max. 130 mA |
Input signals (measuring system) | HTL, TTL, analog (order disignation) |
Signal channels | A, B, Z, resp. A, A', B, B', Z, Z' or analog 0 ... 3.3 V (order designation) |
External inputs | 16 x digital PNP inputs, assignment and logic are freely programmable |
Input current / pin | max. 10 mA |
Min. pulse time for inputs | 300 ms |
Max. input frequency | 100 kHz, higher on request |
Analog inputs | optionally 1 ... 3 analog inputs (12 bit) at 3.3 VDC measuring system supply |
Output signals | 16 digital PNP outputs, assignment and logic (active high/low) are freely programmable |
Output current | max. 2 A per output / 8 A total current across all outputs, the outputs are durable short circuit proof (no multible short circuits) |
Freewheel clutch/outputs |
for inductive loads integrated (clamping voltage at the output max. -36 V) |
Analog outputs |
optional: ± 10 V PID or ± 10 V unregulated (each 12 bit) |
Interfaces | optional: RS232 |
Connections | industry standard connectors (3.81 mm grid, lockable) and additional RJ45 sockets (depending on version) |
Power down memory |
E²Prom (service life: 1.000.000 switching on/off cycles or 40 years) |
Further options |
8 = only 8 instead of 16 digital in- and outputs N = digital inputs as NPN version |
Accessories |
NG13 power pack (primary: 115/230 VAC secondary: 24 VDC /600 mA), relay card RP8 with 8 changeover relays (28 VDC/250 VAC / 12 A), P40 (T) interface cable /Art. No: 820137012) |
ENVIRONMENTAL CONDITIONS
Operating temperature | -0 ... +45 °C |
Storage temperature | -20 ... +50 °C |
Humidity | max. 80 %, non-condensing |
Protection class (front) | IP43 (installed state) |
Protection class (rear) | IP00 |